Followers

Tuesday, August 25, 2015

Miniature Dachshund

Time for another challenge over at

Challenge #45
PETS/ANIMALS

Welcome back to the IKEsWORLD challenges :)  do pop on over to IKEsWORLD to join in the challenge, just remember, you must use and IKEsART image to be eligible for the prize.  Why not pop on over to the store too :), Ike produces the most amazing stamps, everything from off the wall to cute and fluffy :) :) :)

While in the UK recently I bought a pyrography set, something I have fancied having a go at for ages now :), so for this challenge I found the perfect image to try my hand.  I know many folks probably do their pyrography either free hand or with their own pencil drawing to form the guide lines but for this week project I wanted to use the yummy image  Miniature Dachshund.  My first challenge was to find a way to transfer the image to my ply wood bone.  I printed the image in reverse using my laser printer to begin with and then used Modge Podge to transfer the image.

 When the glue was dry I then removed the paper carefully with water.  Now I suspected I would have a problem with the glue remaining behind and trapping the laser printed image below it - looks great if you just want to go this far but now I want to burn the wood.  As suspected I did have a problem, it sort of worked but the glue formed ridges on either side of my burn lines and sanding afterwards was a real bummer.  You can also see on the top right where I have tried to peel the glue off and ended up removing one of the ply wood layers.
 Time to try a second way of doing this :) This time I used a desk jet printed and printed on the glossy side of some vinyl protective paper (this is non-porous so the ink is not absorbed into the paper).  Very carefully I laid the ply wood bone on top of the printed paper, one slip and it will smudge lol.  In the photo below you can see the printed image, well what was left of the ink after I had removed the bone.
 Next I went over the lines of my text, paw prints and Ike's image with the pyrography tool. I then burnt the edges of the bone a bit too.  Cool, I do like this and have ideas on how to take this further in the future.
 As this is going to be a keyring I used my eyelet tool to make a hole in the soft wood and then used Modge Podge to protect the wood and make it a bit stronger.
Finally I dismantled an old keyring and used the chain section to make my dog bone into a usable keyring.


Ingredients:-
  • image -  Miniature Dachshund
  • from my stash - plywood dog bone shape, pyrography tool, wax backed paper, key chain, Modge Podge
I am entering this project into the following challenges:-

10 comments:

  1. How marvelous that is and I am so glad that you are trying Pyrography. I also do this and find it very therapeutic (if a bit smelly) LoL Another good way is to trace over your image onto the wood using Graphite Paper (or by scribbling thick black lead onto the back ) :-D

    Thanks fopr making this lovely little key ring with my image MiMi :-)

    Hugz
    IKE xxxx

    ReplyDelete
  2. What a great project, and perfect for my Animals challenge at LunagirlMoonbeams.com Thanks for sharing it there! ~ Karen

    ReplyDelete
  3. Fabulous project, the dog looks great and the finished product is gorgeous. Thanks for joining us at Crafty Friends.

    ReplyDelete
  4. Such a cute project. Your work is always an inspiration. Thanks for joining us at One Stitch at a Time. Good luck. Maggie - OSAAT DT

    ReplyDelete
  5. Thanks for entering the 'Clean and Simple' Challenge at Crafty Friends with your lovely key tag, hope to see you again and Good Luck.
    Diane Louise xx

    ReplyDelete
  6. awww fabulous project thank you so much for joining in with our 'something new' challenge over at Polkadoodles. http://polkadoodle.blogspot.co.uk/2015/08/week-34-crafting-challenge-at.html

    ReplyDelete
  7. So cool, what a great idea. Thanks so much for playing in the use something new challenge with Polkadoodles Penny (Polkadoodles DT)

    ReplyDelete
  8. Adorable key ring, I love that image and the fabulous wood burning! Thanks for joining us at Alphabet Challenge Blog!
    Tammy x

    ReplyDelete
  9. So sweet. Great idea.
    Thanks for playing with us at Craft your Passion.
    Hope we see you again and good luck.
    xxx Michelle (DT)

    ReplyDelete
  10. Wow what a fab project, soooooo clever! Thanks so much for joining our 'Something New' Challenge at Polkadoodles
    Claire xx

    ReplyDelete

Thank you for taking the time to comment, it means a great deal to me. Hoping you have happy crafting days ahead. Hugs Mimi